EDGECAM | Designer’s many geometry creation techniques are essential to the machinist for model preparation. EDGECAM | Designer’s sketch capabilities make it easy to create 2D shapes using free-form input, which interacts with surrounding geometry. Removing portions of the model, such as intersecting features, speeds up machining and provides better results. As well as feature suppression, the geometry can also be simplified at various stages of the machining process.
“EDGECAM | Designer simply removes them and can save them for later operations if required, with just a mouse click.” “Incoming CAD data often includes geometry features that aren’t necessary for CAM, or won’t be created by the machining process.” John Buehler says while many post-machining processes are frequently represented on the model, and are important for CAD design as they will ultimately be needed in the final component, they can hinder CAM programming. “And closing a surface model to produce a solid body eliminates construction problems later in the process.”įeature Suppression. Where surfaces are corrupt or missing, EDGECAM | Designer automatically creates the edge curve geometry, making it easy to rebuild new faces. Small gaps between surfaces on imported models can be automatically healed, preventing the time consuming need to rebuild very small surface patches. “It’s no longer necessary to know how the original model was constructed, and design changes aren’t constrained to the original methods of creation.” “These changes can be completely free-form, or driven by numeric increments and measurements taken from existing geometry,” says John Buehler.
#Edgecam tutorial series
Rather than modifying a lengthy series of parameters to make a design change, desired shapes can be obtained by simply pushing, pulling and dragging the geometry. This frees the user from the constraints of a parametric modelling system.
#Edgecam tutorial full
“From fixture design to quick and easy part modification, EDGECAM | Designer is truly the right CAD for CAM, by providing a full set of tools to fill the gap between the two.” Major EDGECAM | Designer Featuresĭirect Modelling. While EDGECAM | Designer operates separately from the CAM system, there are triggers within it which will launch CAM, and there is full associativity between the two. “Generally, those modifications do not impact on a part’s design or performance, but will make it more manufacturable.” EDGECAM | Designer allows users to read the native CAD data…clean up any poor geometry, close the gaps, stitch it into a solid, and then make modifications that are important to the CAM process, such as the suppression of features, or the modification of draft angles. “Some modellers do not maintain adequate tolerances, so the models will often require a degree of repair – or if they’ve only been roughly modeled there may be gaps in the geometry. He says having this single and unified solution for solids-based designs gives Vero users the flexibility of receiving a CAD file from any source, for review or modification. It provides a very quick, dynamic editing and modelling environment, where users simply sketch, drag, hold, push or twist, to create and modify models.” “It’s not dependent on having a series of parameters that drive it, or a feature tree. John Buehler, from Vero Software, says EDGECAM | Designer represents the CAD framework that will become the core modelling engine for all CAM applications.
#Edgecam tutorial software
Vero Software has launched a powerful new direct modelling system to fill the gap between CAD and CAM, focusing on the specific needs of machinist programmers.Īs a stand-alone, optional application for its CAM portfolio, the newly-available EDGECAM | Designer enables users to create new designs or modify existing geometry from third party CAD systems. EDGECAM | Designer – Vero’s New Direct Modelling CAD System
0 kommentar(er)
